Get Adobe Flash player

hopper dryer mumbai

Diagram of Installation Performance Characteristics

  • The heating barrel is made from the stainless steel to ensure that the material is not polluted and easier to be cleaned.
  • The air dispersion device of the stainless steel net plate enables the heat air to evenly blow the material . The temperature is even in the barrel and the material sinters on time.
  • There is hinge connection structure between the heating barrel and the hopper, which facilitates opening, reloading and cleaning.
  • An open-door type magnetic base, which is convenient and easy to take out the magnetic shelf for cleaning the scrap iron.
  • The timing startup device of any time can be matched to reduce pre-heating time on duty and improve efficiency.(optional)
  • The hot air recycle device can be matched to reduce energy consumption.(optional)
  • The Hopper dust collector can be matched to prevent the dust into the workshop.(optional)
Specifications

Model Capacity
(Kg)
Heater Power(Kw) Blower Power(W) External
Dimensions(L*W*H)
Seat
Dimensions(K*K*J)
Adaptable Injectioner(g) Weight
(Kg)
IHD-15 15 2.7 120 660*360*800 120*120*50 30-60 28
IHD-25 25 3.2 120 725*405*950 150*150*60 30-60 38
IHD-50 50 4.2 180 840*490*1070 160*160*75 125-500 75
IHD-75 75 5 180 900*550*1175 160*160*75 500-1000 85
IHD-100 100 7 250 955*605*1410 200*200*90 1000-1500 95
IHD-150 150 9 250 960*610*1560 200*200*90 1500-2000 120
IHD-200 200 12 400 1230*770*1660 230*240*105 2000-2500 150
IHD-250 250 14.5 400 1235*775*1790 230*240*105 2500-3000 170
IHD-300 300 14.5 400 1335*870*1810 230*230*110 3000-4000 200
IHD-400 400 18 500 1360*915*1870 280*280*120 4000-6000 225
IHD-600 600 24 800 1360*950*2080 280*280*135 6000-8000 250
IHD-800 800 30 1100 1380*1150*2250 280*280*135 8000-10000 300
IHD-1000 1000 36 3000 1400*1200*2600 280*280*135 8000-12000 360
Hopper dryer mumbai –

IVR  “Standard” hopper dryers mumbai offer an effective and low-cost method for plastic material drying. Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly mounted on the moulding machine for quick drying and space saving. For this series, hot air blows evenly from bottom to the top (both SHD-800 and SHD-1000 have down-blowing air pipe and accessible door for easy material clearance) of the hopper with capacity ranging from 12~1,000kg, Optional 24-hour timer is available for each model.
“Standard” Hopper Dryers mumbnai –

Features :

Adopt hot air diffuser to gain an even hot air flow to improve drying efficiency.

Unique hot air inlet elbow design can prevent dust piling up at bottom of the pipe heaters so as to avoid burning.

All material contact surfaces are made of stainless steel to eliminate material contamination.

Hopper separated from its base, ensuring convenient cleaning.

Proportional deviation display thermostat for accurate temperature control.

All series are equipped with exposed power switch.

Equipped with excitation tripping overheat protection, making machine operation secure and reliable.

For SHD-25~150, heater pipes are connected by aluminum sheets and other models are equipped with temperature protection to prevent heater pipe from damaging by blower faults.

Overheat tripping can automatically cut off power when drying temperature exceeds set deviation value.

Adopts heat-insulated blower to prolong blower lifespan. 24 hours auto start/stop timer and double insulated hopper are available as options.

Cyclone dust separator, exhaust air filter, magnetic base and blower inlet filter are optional.

Hot air recycler, suction box, hopper magnetic, N type floor stand and storage hopper are optional.

 

 

We are giving Hopper dryer mumbai at best rate .

IVR Plastic Machinery & Solutions is a supplier of auxiliary equipments for the plastics industry mumbai . IVR has a complete range of auxillary machinery to respond to any requirement in the specific areas of Injection moulding , Blow Moulding, Extrusion, INDIA